Roof Installation & Replacement in Branson, MO
Full tear-off asphalt shingle and metal roof replacement for Branson-area homes, with decking checked, flashing renewed, and ventilation reviewed before the new roof goes on.
Roof Installation & Replacement
A New Roof Built From the Deck Up
Roof replacement is easiest to plan before the leaks start, not after. Curling or cupped shingles, bald patches where granules have washed into the gutters, soft spots underfoot, and repairs that keep multiplying are the signs an asphalt roof is near the end of its life. In Branson, MO, summer heat, humid air, and winter freeze-thaw cycles all speed that process along. Behind the work are more than 37 years of combined construction and roofing experience at Benson Roofing, 20 of them spent building custom and spec homes, and it shows in how a replacement is handled. The old roofing comes off down to the decking, damaged boards are found and replaced instead of covered, and flashing, ventilation, and underlayment are treated as part of the roof rather than afterthoughts. Whether you choose asphalt shingles or metal roofing, the result is a complete roof system on a sound deck, with every eave, valley, wall, and penetration detailed to keep water out.
- Full tear-off to the decking
- Damaged decking replaced
- Ice and water shield
- New flashing and drip edge
- Attic ventilation reviewed
- Asphalt shingle or metal
Residential Roofing
Branson, MO
From Deck to Ridge
What Goes Into a Roof Replacement Done Right
A new roof is only as good as the parts you stop seeing once the shingles are down. These are the standards a replacement is approached with, from the first shingle pulled to the last nail picked up from the lawn.
Complete Tear-Off, No Layovers
Old shingles and underlayment are removed down to the bare deck. Laying new shingles over old ones hides rot, traps heat, and adds weight, and it leaves no chance to inspect the wood underneath.
Every Decking Board Checked
With the deck exposed, the crew walks it for soft, delaminated, or rotted sheathing, most often found at eaves, valleys, and around old leaks. Damaged sections are cut out and replaced so new fasteners hold.
Underlayment Where Water Collects
Ice and water shield goes in valleys, along eaves, and around penetrations, where water slows down or backs up, with underlayment across the rest of the deck. It protects the house when wind drives rain under shingles.
Flashing Renewed Where It Matters
Step flashing at sidewalls, chimney flashing, valley metal, and drip edge are evaluated and replaced wherever they are bent, rusted, or held together with layers of caulk, a common leak source on otherwise sound roofs.
Ventilation Reviewed Before Install
Intake at the soffits and exhaust at or near the ridge are checked against the attic they serve. A new roof over a poorly ventilated attic can age early from trapped heat and moisture, especially in Ozarks summers.
Clean Site, Owner Sign-Off
Debris is hauled away, gutters are cleared of shingle grit, and the yard and driveway are checked for stray nails. Then the owner inspects the finished roof before the job is considered complete.
Roof Installation & Replacement Services We Provide
Replacement covers more than shingles. Depending on the house and the material you choose, the scope can include any of the following, all agreed on before tear-off begins.
01
Asphalt Shingle Re-Roofing
Asphalt shingles are installed over new underlayment with a proper starter course, correct nailing, and finished ridge cap. Color and profile are chosen to suit the home and its surroundings.
02
Switching to Metal Roofing
When a home moves from shingles to metal, panels are installed with the fastening, trim, and underlayment the system calls for. Metal sheds snow and leaf debris well, suiting wooded lots and steep hillside roofs.
03
Decking Repair and Replacement
Rotted, delaminated, or water-damaged sheathing found during tear-off is cut out and replaced, so shingles and fasteners are attached to solid wood instead of compromised boards.
04
New Flashing at Walls and Eaves
Step, counter, chimney, and valley flashing are installed or replaced, and drip edge is fitted along eaves and rakes so water is carried into the gutters rather than behind the fascia.
05
Ridge and Roof Vents
Ridge vents, roof vents, and pipe boots are installed as part of the new roof, with exhaust sized to the intake available at the soffits so the attic actually moves air.
06
Tear-Off Cleanup and Disposal
Old roofing is removed and hauled away, gutters are cleared of debris, and the property is checked for nails and scraps before the crew leaves the site.
What Our Customers Say
Reviews
37+ Years of Experience
How It Works
How Our Roof Installation & Replacement Works
Your roof replacement starts with a look at both the roof surface and the attic to confirm that replacement, not repair, is the right call. You get a clear scope covering tear-off, underlayment, flashing, ventilation, and material choice, plus how damaged decking will be handled if it turns up. Once the date is set, the old roof comes off, the deck is checked and repaired, and the new roof goes on in sequence.
A Benson Roofing crew that has stayed together for over 11 years handles the tear-off and installation, and nothing is signed off until the owner has walked the finished roof. If the attic runs hot or the gutters are failing, a replacement is the right time to address them with Attic Ventilation Installation or Gutter Installation and Repair, available throughout Branson, MO and Southwest Missouri.
Common questions
Frequently asked questions
Replacing a roof raises practical questions about timing, materials, and what happens once the old roof is off. Here are answers for homeowners in Branson, MO and Southwest Missouri.
Can new shingles go over my existing roof?
Building codes often allow a second layer, but it is rarely the better choice. A layover hides decking damage, adds weight, holds heat, and makes the next replacement harder. A full tear-off lets damaged boards be replaced and flashing be redone properly.
Should I choose asphalt shingles or metal roofing?
Asphalt shingles cost less up front and suit most homes. Metal roofing costs more but typically lasts longer, sheds snow and debris easily, and resists wind well when properly fastened. Roof pitch, budget, how long you plan to stay, and the look of the home all factor in.
Is one season better than another for replacing a roof?
Roofs are replaced year-round in Southwest Missouri, but conditions matter. Asphalt shingles seal best in mild, warm weather, so winter installs may call for hand-sealing the tabs. Spring storms and summer heat can affect scheduling. What matters most is not waiting until a failing roof starts leaking.
What happens if it rains during the replacement?
Tear-off is normally planned around the forecast, with the aim of opening only as much roof as can be dried in with underlayment before work stops for the day. If weather moves in unexpectedly, exposed areas are covered to keep the house protected until work resumes.
Do I need to be home while the roof is replaced?
Not necessarily, but attic and garage access help, and cars should be out of the driveway. Tear-off is loud and causes vibration, so take down fragile items hanging on upstairs walls and ceilings beforehand. Pets are usually happier away from the noise.
What happens to the roof decking during a replacement?
Once the old shingles and underlayment are off, the decking is checked across the whole roof. Soft, rotted, or delaminated boards are replaced before new underlayment goes down, because shingles fastened to weak decking can loosen, sag, or let nails back out. You are told about any damaged decking that is found.
